1998 Ford Explorer Owner Guide 1st Printing - Page 61

Controls and features Press the control once to unlock the driver's door and move the memory seat feature to the corresponding memory position, just as if you had pressed the memory control in the vehicle. When your dealer programs new transmitters: • the first transmitter programmed will recall memory position one. • the second transmitter programmed will recall memory position two. • the third transmitter programmed recall memory position three. • the fourth transmitter programmed will not recall a memory position. Memory positions can be changed at any time. The memory feature can be deactivated or reactivated by performing the following: 1. Make sure the alarm system (if equipped) is not armed or triggered, the ignition is off and all doors and the liftgate window are closed. 2. Turn the ignition key from OFF to ON. 3. Press the power door unlock control three times. 4. Turn the ignition key from ON to OFF. 5. Press the power door unlock control three times. 6. Turn the ignition switch back to ON. The horn will chirp. 7. Press the power door unlock switch twice. 8. Press the unlock control two times, then press the lock control. The horn will chirp twice if the remote memory seat feature was deactivated or will sound three times (two short chirps followed by one long chirp) if the feature was activated. 9. Turn the ignition to OFF. The horn will chirp once to confirm that you activated or deactivated the remote memory seat feature. The memory feature will continue to work from the door switch even when deactivated at the remote entry module. 61