1998 Ford Explorer Owner Guide 1st Printing - Page 64

Controls and features 1. Enter the 5 digit entry code. 2. Press and release the 3/4 control while holding the 7/8 control. 3. Release the 7/8 control. The horn will chirp once if autolock was deactivated or twice (one short and one long chirp) if autolock was activated. 1 2 3 4 5 6 7 8 9 0 To reactivate autolock, repeat steps 1 through 3. Autolock can also be activated or deactivated using the following procedure: You must complete steps 1 through 5 within 30 seconds or the procedure will have to be repeated. If the procedure needs to be repeated, you must wait 30 seconds. 1. Turn the ignition key to ON. 2. Press the power door unlock control three times. 3. Turn the ignition key from ON to OFF. 4. Press the power door unlock control three times. 5. Turn the ignition key back to ON. The doors will lock and unlock. 6. Press the power door unlock switch. The horn will chirp once upon successful toggling of the Autolock feature. 7. Turn ignition to OFF. The horn will chirp to confirm procedure is complete. Keyless entry system (if equipped) With the keyless entry keypad, you can: 1 2 • lock or unlock the vehicle doors without using the key • arm and disarm the perimeter alarm system (if equipped) • activate/deactivate the autolock feature 64 3 4 5 6 7 8 9 0