2008 Ford Taurus X Owner's Manual - Page 93

Lights 2. Reach in behind the headlamp assembly to access the bulb sockets and connectors. 3. Locate the outboard (low beam) or inboard (high beam) electrical connector and remove it by releasing the locking tab and pulling it straight down. 4. Remove the bulb socket by turning it counterclockwise and pulling it straight out. Handle a halogen headlamp bulb carefully and keep out of children's reach. Grasp the bulb only by its plastic base and do not touch the glass. The oil from your hand could cause the bulb to break the next time the headlamps are operated. Install the new bulb(s) in reverse order. Replacing front parking lamp/turn signal bulbs 1. Make sure headlamp switch is in the OFF position, then open the hood. 2. Reach behind the headlamp assembly to access the bulb sockets and connectors. 3. Remove the bulb socket by turning it counterclockwise and pulling it straight out. 4. To remove the bulb, pull it straight out of the bulb socket. Install the new bulb(s) in reverse order. Replacing front sidemarker bulbs 1. Make sure headlamp switch is in the OFF position, then open the hood. 2. Reach behind the headlamp assembly to access the bulb sockets and connectors. 93 2008 Taurus X (219) Owners Guide (post-2002-fmt) USA (fus)