2008 Ford Taurus X Owner's Manual - Page 94

Lights 3. Locate the front sidemarker lamp electrical connector and remove it by pulling it off. 4. Remove the bulb socket by turning it counterclockwise and pulling it straight out. 5. To remove the bulb, pull it straight out of the bulb socket. Install the new bulb(s) in reverse order. Replacing rear stop/park/turn/backup and side marker lamp bulbs The stop/tail/turn/backup and side marker lamp bulbs are located in the tail lamp assembly. Note: Your vehicle is equipped with a stop/park/turn and side marker lamp assemblies containing integral multiple light emitting diodes (LED). If replacement is required, see your authorized dealer. • (1) Backup lamp • (2) Stop/park/turn signal lamp (LED) • (3) Side marker lamp (LED) 1. Make sure the headlamp switch is in the OFF position and open the liftgate. 2. Remove the two screws in the liftgate opening, then pull the lamp assembly away from the vehicle. 3. Remove the bulb socket by rotating it counterclockwise, then pulling it out of the lamp assembly. 4. Pull the bulb straight from the socket. Install new bulb(s) in reverse order. 94 2008 Taurus X (219) Owners Guide (post-2002-fmt) USA (fus)