2011 Ford Fiesta Owner Guide 3rd Printing - Page 113
2011 Ford Fiesta Manual
Page 113 highlights
Lights 1. Make sure the headlamp control is in the off position, then open the hood. 2. Remove the screws and pushpin holding the lamp assembly (1). (Driver side shown) 1 3. Detach the lamp harness clips from the lamp assembly and disconnect the electrical connectors (2). 4. Remove the lamp assembly (3). Note: When lamp is removed, you will hear a clicking sound. 5. Reverse the procedure to install the lamp assembly. Note: When installing the front lamp assembly, the front flange must be placed under the fascia. Ensure that the bottom tab gets placed into the white clip. 2 3 Replacing the low beam headlamps Note: The low beam headlamp is the outboard lamp. Note: Never hold a bulb by the glass. This is particularly valid for halogen bulbs as the intensity of the light may be reduced if the hands touch the bulb. If the glass has been handled, clean it with alcohol. 113 2011 Fiesta (fie) Owners Guide, 3rd Printing USA (fus)