2011 Ford Fiesta Owner Guide 3rd Printing - Page 128

Driver Controls Using speed controls The speed controls are located on the steering wheel. The following buttons work with speed control: SET+: Press to set a speed or to increase a set speed. CAN (Cancel)/RES (Resume): Press to cancel or resume a set speed. SET-: Press to decrease a set speed. OFF: Press to turn speed control off. ON: Press to turn speed control on. Setting speed control To set speed control: 4. Press and release ON. 5. Accelerate to the desired speed. 6. Press and release SET+. 7. Take your foot off the accelerator pedal. 8. The indicator light on the instrument cluster will turn on. Note: • Vehicle speed may vary momentarily when driving up and down a steep hill. • If the vehicle speed increases above the set speed on a downhill, you may want to apply the brakes to reduce the speed. • If the vehicle speed decreases more than 10 mph (16 km/h) below your set speed on an uphill, your speed control will disengage. Disengaging speed control To disengage speed control, tap the brake pedal or clutch pedal (if equipped) or press CAN. Disengaging the speed control will not erase the previous set speed. Note: When you use the clutch pedal to disengage the speed control, the engine speed may briefly increase, this is normal. Resuming a set speed Press and release RES. This will automatically return the vehicle to the previously set speed. 128 2011 Fiesta (fie) Owners Guide, 3rd Printing USA (fus)