2012 Ford Edge Owner Guide 1st Printing - Page 128

Locks and Security Memory feature (seat and mirrors) (if equipped) The integrated keyhead transmitter (IKT) or intelligent access key (IA key) allows you to recall the memory seat and power mirrors feature. or activate intelligent access (if equipped) to recall memory Press and automatically move the seat and power mirrors to the desired memory position. The mirrors will move to the programmed position and the seat will move to the easy entry position. The seat will move to the final position when the ignition is switched out of off (if easy entry feature is enabled). Programming the memory feature to the transmitter To activate this feature: 1. Move the driver seat and power mirrors to the desired positions using the associated controls. 2. Press and hold button 1 for five seconds. A tone will be heard after about two seconds confirming memory position has been set. Continue to hold until a second tone is heard after five seconds. 3. Within three seconds press 4. Wait 10 seconds, then press . . 5. Repeat this procedure for memory 2 and another transmitter if desired. Deprogramming the memory feature from the transmitter To deactivate this feature: 1. Press and hold either the 1 or 2 button for five seconds. A tone will be heard after 11⁄2 seconds when the memory store is done, continue to hold until a second tone is heard after five seconds. 2. Within three seconds press the . 3. Repeat this procedure for each additional transmitter if desired. 128 2012 Edge (edg) Owners Guide, 1st Printing USA (fus)