2012 Ford Edge Owner Guide 1st Printing - Page 148

Seating and Safety Restraints To operate the heated seats: Press the heated seat symbol to cycle through the various heat settings and off. Warmer settings are indicated by more indicator lights. If the engine falls below 350 rpm while the heated seats are on, the feature will turn itself off and will need to be reactivated. Memory feature (if equipped) This system allows automatic positioning of the driver seat and power mirrors to two programmable 2 1 positions. The memory seat control is located on the instrument panel. • To program position 1, move the memory features to the desired positions using the associated controls. Press and hold button 1 for at least two seconds. A chime will sound confirming that a memory position has been set. • To program position 2, repeat the previous procedure using button 2. A memory seat position may be programmed at any time. To program the memory feature to a remote entry transmitter, refer to Remote entry system in the Locks and Security chapter. A programmed memory position can be recalled: • in any gearshift position if the ignition is not on. • only in P (Park) or N (Neutral) if the ignition is on. The memory positions are also recalled when you press your remote (unlock) control (if the transmitter is programmed entry transmitter to a memory position) or, when you enter a valid personal entry code that is programmed to a memory position. The mirrors will move to the programmed position and the seat will move to the easy entry position. The seat will move to the final position when the key is in the ignition (if easy entry feature is enabled). 148 2012 Edge (edg) Owners Guide, 1st Printing USA (fus)