2012 Ford Edge Owner Guide 1st Printing - Page 89

Driver Controls SPEED CONTROL (IF EQUIPPED) With speed control set, you can maintain a set speed without keeping your foot on the accelerator pedal. WARNING: Do not use the speed control in heavy traffic or on roads that are winding, slippery or unpaved. Using speed control The speed controls are located on the steering wheel. The following buttons work with speed control: SET: Press to set a speed or to increase or decrease the set speed. RES (Resume): Press to resume the set speed. CNCL (Cancel): Press to cancel the set speed. ON/OFF: Press to turn speed control on or off. Setting speed control To set speed control: 1. Press ON upward and release. 2. Accelerate to the desired speed. 3. Press SET upward and release. 4. Take your foot off the accelerator pedal. 5. The indicator light on the instrument cluster will turn on. Note: • Vehicle speed may vary momentarily when driving up and down a steep hill. • If the vehicle speed increases above the set speed on a downhill, you may want to apply the brakes to reduce the speed. • If the vehicle speed decreases more than 10 mph (16 km/h) below your set speed on an uphill, your speed control will disengage. Disengaging speed control To disengage the speed control, press the brake pedal or press and release CNCL. Disengaging the speed control will not erase the previous set speed. 89 2012 Edge (edg) Owners Guide, 1st Printing USA (fus)