2012 Ford F350 Super Duty Owner Guide 4th Printing - Page 119

Driver Controls 2. Press and hold the outer two buttons for 1-2 seconds, then release. Note: You may need a ladder to reach the unit and you may need to remove the cover or lamp lens. Note: If you cannot locate the learn button, refer to the Owner Manual of your garage door opener or call the toll-free help line on 1-866-572-2728. 3. Press the learn button on the garage door opener motor. Note: You will have 10-30 seconds to complete the following steps. 4. Return to your car. 5. Press and hold the function button you would like to use to control the garage door. You may need to hold the button from 5-20 seconds, during which time the selected button LED lamp will flash slowly. 6. When the garage door moves, release the button within one second. The LED lamp will flash rapidly until programming is complete. 7. Press and release the button again. The garage door should move, confirming that programming is successful. If your garage door does not operate, repeat the previous steps. The LED lamp above the selected button will illuminate to confirm that the system is responding to the button command. To program another rolling code device, repeat steps one through six substituting a different function button in step four. 119 2012 F-250/350/450/550 (f23) Owners Guide, 4th Printing USA (fus)