2012 Ford F350 Super Duty Owner Guide 4th Printing - Page 208

Seating and Safety Restraints Attach the tether strap only to the appropriate tether anchor as shown. The tether strap may not work properly if attached somewhere other than the correct tether anchor. Once the child safety seat has been installed using the safety belt, you can attach the top tether strap. Tether strap attachment 1. Route the child safety seat tether strap over the back of the seat. For vehicles with adjustable head restraints, route the tether strap under the head restraint and between the head restraint posts, other wise route the tether strap over the top of the seatback. If the top of the safety seat hits the head restraint, raise the head restraint to let the child seat fit further rearward. 2. Locate the correct anchor for the selected seating position. 3. You may need to pull the seatback forward to access the tether anchors. Make sure the seat is locked in the upright position before installing the child seat. Refer to the Rear folding seat system with load floor section in this chapter for information on how to operate the rear seats. 4. Remove tether cover. 208 2012 F-250/350/450/550 (f23) Owners Guide, 4th Printing USA (fus)