2012 Ford F350 Super Duty Owner Guide 4th Printing - Page 28

Instrument Cluster Perform compass calibration in an open area free from steel structures and high voltage lines. For optimum calibration, turn off all electrical accessories (heater/air conditioning, wipers, etc.) and make sure all vehicle doors are shut. 7. Press the RESET button until the display reads RESET FOR CALIBRATION to start the compass calibration function. 8. Slowly drive the vehicle in a circle (less than 3 mph [5 km/h]) until the CIRCLE SLOWLY TO CALIBRATE display changes to CALIBRATION COMPLETED. It will take up to five circles to complete calibration. 9. The compass is now calibrated. Note: If the RESET button is pressed or three minutes has expired, the display will go back to the INFO menu and will show CAL instead of the compass heading until the compass is calibrated. RESET FOR REMOTE START (if equipped) Press RESET to enable remote start on or off and choose the remote start duration time (5, 10, 15 minutes) and other options. REAR PARK AID (if equipped) This feature sounds a warning tone to warn the driver of obstacles near the rear bumper, and functions only when R (Reverse) gear is selected. Press RESET to turn this feature on or off. You can also choose to turn this feature on/off when the vehicle is placed in reverse. TBC MODE (if equipped) Allows you to choose the trailer brake mode. Press RESET to choose: • ELECTRIC • EOH (electric over hydraulic) TRAILER SWAY (if equipped) This feature uses the electronic stability control to mitigate trailer sway, Press RESET to turn it off or on. LANGUAGE = ENGLISH / SPANISH / FRENCH Allows you to choose which language the message center will display in. Selectable languages are English, Spanish, or French. Waiting four seconds or pressing the RESET button cycles the message center through each of the language choices. Press and hold the RESET button for two seconds to set the language choice. 28 2012 F-250/350/450/550 (f23) Owners Guide, 4th Printing USA (fus)