1997 GMC Jimmy Owner's Manual - Page 297

Front Reading Lamps 1. Use a coin or srnall screwdriver to 11nscrew the center of the overhead console lamp lens while pressing in on the lamp assembly. 4. Press the new bulb into place. 5 . Slide the side tabs of the lens under the side of the vanity assembly frame. 6. Rotate the lens downward. 2. Remove the lamp assembly from the console. 3. Remove the bulb assembly from the lamp assembly. 4. Pull the bulb straight out of the base. 7. Snap the lens into the frame. Windshield Wiper Blade Replacement See "Normal Maintenance Replacement Parts" in the Index for the proper type of replacement blade. 5. Put a new bulb into the bulb base. 6. Install the bulb assembly into t.he lamp assembly. 7 . Place the lamp assembly into the console, turning it to latch it i n place. NOTICE: ~~~~ a. Install the lens. Vanity Mirror Lamps the Insert 1. blade of a small screwdriver into the center slot at the bottom of the lens. I Use care when removing or installing a blade assembly. Accidental bumping can cause the arm to fall back and strike the windshield. 1. To remove the old wiper blades, lift the wiper arm until it locks into a vertical position. I 2. Gently pry the screwdriver down in order to lift out the lens. 3. Pry out the bulb. 6-38