1993 Honda Civic Owner's Manual - Page 141
1993 Honda Civic Manual
Page 141 highlights
Lights 3. Remove the rubber weather seal by pulling on the tab. 4. Unclip the end of the hold-down wire from its slot. Pivot it out of the way and remove the bulb. 5. Insert the new bulb into the hole, making sure the tabs are in their slots. Pivot the hold-down wire back in place and clip the end into the slot. 6. Push the rubber weather seal over the bulb. Make sure the tab is on the top. 7. Push the electrical connector onto the tabs of the new bulb. Turn on the headlights to test the new bulb. 8. (Passenger's side) Reinstall the air intake tube. continued Replacing the Front Side Marker/Turn Signal and Parking Light Bulb SCREW 1. Use a Phillips® head screwdriver to remove the screw from the top of the fender. 2. Move the side marker light assembly forward until it slides out of the body. 3. Turn the socket one-quarter turn counterclockwise to remove it from the lens. Maintenance