2005 Honda Accord Owner's Manual - Page 153

HomeLink Universal Transceiver Training HomeLink Before you begin If you just received your vehicle and have not trained any of the buttons in HomeLink before, you should erase any previously learned codes before training the first button. To do this, press and hold the two outside buttons on the HomeLink Transceiver for about 20 seconds, or until the red light flashes. Release the buttons, then go to step 1. If you are training the second or third buttons, go directly to Step 1. 1. Unplug the garage door opener motor from the electrical outlet. 2. Hold the end of the garage door opener remote 2 to 5 inches from HomeLink. Make sure you are not blocking your view of the red indicator in HomeLink. 3. Press and hold the remote transmitter button and one of the HomeLink buttons at the same time. If the red indicator in HomeLink begins to flash slowly at first, then rapidly, release both buttons, and go to step 5. If the red indicator in HomeLink continues to flash slowly (does not flash rapidly), it may be because your remote transmitter stops transmitting after a short time. Go to step 4. Features CONTINUED 155