2005 Honda Accord Owner's Manual - Page 226
2005 Honda Accord Manual
Page 226 highlights
Lights 6. Install the new bulb and turn it one-quarter turn clockwise to lock it in place. 7. Push the electrical connector onto the bulb. 8. Turn on the headlights to test the new bulb. 9. Put the inner fender cover in place. Install the two holding clips. Lock each one in place by pushing on the center. BULB Replacing the Front Side Marker/ Turn Signal and Parking Light Bulb HOLDING CLIPS Maintenance 1. To change the passenger's side bulb, start the engine, turn the steering wheel all the way to the left, and turn off the engine. To change the driver's side bulb, turn the steering wheel to the right. 2. Use a flat-tipped screwdriver to remove the two holding clips from the inner fender. 3. Pull the inner fender cover away from the fender and bumper. 4. Remove the socket from the headlight assembly by turning it one-quarter turn counterclockwise. CONTINUED 229