2007 Honda Fit Owner's Manual - Page 192

Lights Replacing a Parking Light/Front Side Marker Bulb and a Turn Signal Light Bulb HOLDING CLIP 2. Use a flat-tip screwdriver to remove the holding clip from the inner fender, then pull the inner fender cover back. 5. Reinstall the socket into the light assembly by turning it clockwise until it locks. 1. To change the bulb on the driver's side, start the engine, turn the steering wheel all the way to the right, then turn off the engine. To change the bulb on the passenger's side, turn the steering wheel to the left. PARKING LIGHT/FRONT SIDE MARKER BULB TURN SIGNAL LIGHT BULB 3. Remove the socket by turning it one-quarter turn counterclockwise. 4. Pull the bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms. 6. Turn on the lights to make sure the new bulb is working. 7. Reinstall the inner fender cover. Then reinstall the holding clip, and lock it in place by pushing on its center. 188