2008 Honda Fit Owner's Manual - Page 204
2008 Honda Fit Manual
Page 204 highlights
Main Menu Table Of Contents Lights Replacing Rear Bulbs 4. Remove the burned out bulb from the socket by pulling it straight out of its socket. 5. Install the new bulb in the socket. 6. Turn on the lights to make sure the new bulb is working. 7. Reinstall the socket into the light assembly by turning it clockwise until it locks. LIGHT ASSEMBLY COVER 8. Reinstall the light assembly cover. 2. Determine which of the four bulbs is burned out: stop/taillight, backup light, turn signal light, or taillight. 3. Remove the socket by turning it one-quarter turn counterclockwise. Maintenance 1. Open the tailgate. Place a cloth on the edge of the light assembly cover. Remove the cover by carefully prying in the notch on its middle edge with a flat-tip screwdriver. 2008 Fit 201