2008 Honda Fit Owner's Manual - Page 224

Main Menu Table Of Contents Changing a Flat Tire EXTENSION BRAKE HUB JACKING POINT WHEEL NUT WRENCH 9. Place the jack under the jacking point nearest the tire you need to change. It is pointed to by a mark molded into the underside of the body (Sport model). Turn the end bracket clockwise until the top of the jack contacts the jacking point. Make sure the jacking point tab is resting in the jack notch. 10.Use the extension and the wheel nut wrench as shown to raise the vehicle until the flat tire is off the ground. 11.Remove the wheel nuts, then remove the flat tire. Handle the wheel nuts carefully; they may be hot from driving. Place the flat tire on the ground with the outside surface facing up. 12.Before mounting the spare tire, wipe any dirt off the mounting surface of the wheel and hub with a clean cloth. Wipe the hub carefully; it may be hot from driving. Taking Care of the Unexpected CONTINUED 2008 Fit 221