2009 Honda Pilot Owner's Manual - Page 496

Lights Replacing a High-mount Brake Light Bulb 7. Put the lens back on the light assembly, and tighten the mounting bolts securely. 8. Turn on the lights to make sure the new bulb is working. 9. Put the light assembly back into the vehicle. Install the screws and tighten them securely. Reinstall the lens segments. LENS SEGMENT 1. Place a cloth on the edge of the lens segment. Remove each lens segment by carefully prying on its edge with a small flat-tipped screwdriver. 2. Remove the screw under each lens. 3. Pull the high-mount brake light assembly out of the vehicle. 4. Remove the two mounting screws from the light assembly. 5. Remove the lens from the light assembly. 6. Pull the bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms. 492 2009 Pilot