2009 Honda Pilot Owner's Manual - Page 99

Multi-Information Display Customize Settings If you turn the ignition switch to the ACCESSORY (I) or the LOCK (0) position, or move the shift lever out of Park, the display will change to the normal screen. Instruments and Controls You can customize some vehicle control settings for ''DRIVER 1'' and ''DRIVER 2'' separately. If ''DRIVER 1'' or ''DRIVER 2'' is not displayed, customizing is not possible. To have the driver's ID detected, make sure your remote transmitter is linked to the system (see Keyless Memory SettingsTM on page 151 ). When the main menu displays ''Keyless Memory SettingsTM,'' you can customize some vehicle control settings. To enter the customizing mode, press the SEL/RESET button. To change the settings, the ignition switch must be in the ON (II) position, and the vehicle must be stopped with the transmission in Park. If you want the settings as they were when the vehicle left the factory, select DEFAULT ALL, as described on page 98 . If you want to change any vehicle control settings, select CHG SETTING, then press the SEL/ RESET button. Refer to the table on the following pages about the settings you want to CONTINUED customize. 2009 Pilot 95