2011 Honda Odyssey Owner's Manual - Page 257
2011 Honda Odyssey Manual
Page 257 highlights
Playing the FM/AM Radio (EX, EX-L models without navigation system) SCAN The scan function samples all stations with strong signals on the selected band. To activate it, press the SCAN button, then release it. You will see SCAN in the display. When the system finds a strong signal, it will stop and play that station for about 10 seconds. If you do nothing, the system will scan for the next strong station and play it for 10 seconds. When it plays a station that you want to listen to, press the SCAN button again. Each preset button can Preset store one frequency on AM and two frequencies on FM. 1. Select the desired band, AM or FM. You can store one frequency on FM1, and one frequency on FM2 with each preset button. 2. Use the tune, skip, scan, or RDS function to tune the radio to a desired station. 3. Pick a preset button, and hold it until you hear a beep. 4. Repeat steps 1 through 3 to store a total of six stations on AM and twelve stations on FM. If you are AUTO SELECT traveling and can no longer receive your preset stations, you can use the auto select feature to find stations in the local area. Push the SETUP button to display the setup MENU. Turn the selector knob to select Auto Select, then press the selector knob. The display changes to the auto select mode. Select ''PUSH TO START'' or ''ON,'' then press the selector knob. You will see Auto Select on the display, and the system goes into the auto select mode for several seconds. If you do not like the stations auto select has stored, you can store other frequencies on the preset buttons as previously described. 254 2011 Odyssey