2011 Honda Odyssey Owner's Manual - Page 633

Lights 5. Insert the new bulb into the hole, and turn it one-quarter turn clockwise to lock it in place. 6. Push the electrical connector back onto the bulb. Make sure it is on all the way. 7. Turn on the fog lights to test the new bulb. TAB CONNECTOR BULB Replacing Rear Bulbs (in Rear Pillar) Pull up Slide 3. Remove the electrical connector from the bulb by pushing on the tab to unlock it, then slide the connector off the bulb. 4. Remove the bulb by turning it approximately one-quarter turn counterclockwise. 8. Reinstall the inner fender. Make sure it is installed under the edge of the front bumper. 9. Reinstall the screws and mounting bolt on the inner fender cover, and tighten them securely. MOUNTING BOLTS 1. Open the tailgate. Use a Phillips-head screwdriver to remove the two mounting bolts. 630 2011 Odyssey