2011 Honda Odyssey Owner's Manual - Page 638

Lights 5. Press the brake pedal to make sure the new bulb is working. 6. Put the socket back into the light assembly, and turn it clockwise to lock it in place. 7. Reinstall the high-mount brake light assembly into the tailgate. Tighten the two screws and reinstall the covers. Replacing a Rear License Plate Light Bulb COVER TABS BULB 1. Open the tailgate. Place a cloth on the edge of the cover to prevent scratches. Remove it by carefully prying in the notch on its edge with a small flat-tip screwdriver. 2. Remove the license light assembly by squeezing the tabs on both sides of the socket. 3. Pull the bulb straight out of its socket. Push the new bulb in until it bottoms in the socket. 4. Turn on the parking lights and check that the new bulb is working. 5. Reinstall the socket. Snap the cover back in place. Maintenance 2011 Odyssey 635