2008 Hummer H2 Owner's Manual - Page 385

5. Unplug the electrical connector. Front Turn Signal and Parking Lamps To replace a front turn signal or parking lamp bulb: 1. Open the hood. See Hood Release on page 5-10 for more information. 2. Locate the bulb you need to change. 3. Turn the bulb socket counterclockwise and remove it from the lamp housing. 6. Push the new bulb socket into the headlamp assembly aligning the splines on the bulb socket with the splines in the headlamp housing. Do not to touch the bulb with your fingers or hands. 7. Turn the bulb socket retainer clockwise to lock it into place. 8. Plug in the electrical connector. 4. Pull the bulb from the bulb socket. 5. Install the new bulb into the bulb socket. 6. Reinstall the bulb socket into the lamp housing and turn it clockwise until it locks. 5-49