2008 Hummer H2 Owner's Manual - Page 8

Heated Seats On vehicles with heated front seats, the controls are located on the driver's and passenger's doors. Memory Seat and Mirrors If your vehicle has this feature, the controls for the memory function are located on the driver's door. 1: Saves the seating position for driver 1. 2: Saves the seating position for driver 2. Press to turn on the Press to turn on the heated I (Heated Seatback): seatback. J (Heated Seat and Seatback): heated seat and seatback. S: Programs and recalls the easy exit position. The light on the button will come on to indicate that the feature is working. Press the button to cycle through the temperature settings of high, medium, and low and to turn the heat to the seat off. Indicator lights will show the level of heat selected: three for high, two for medium, and one for low. The heated seats will be canceled ten seconds after the ignition is turned off. To use the heated seat feature after restarting your vehicle, press the heated seat or seatback button again. These buttons are used to program and recall memory settings for the driver's seat and both the driver's and passenger's outside mirrors. The settings for these features can be saved for up to two drivers. To store the memory settings: 1. While the vehicle is in PARK (P), adjust the driver's seat, including the seatback recliner, lumbar, and side wing area, and both outside mirrors to a comfortable position. 2. Press and hold button 1 until a double chime sounds to let you know that the position has been stored. A second seating and mirror position can be programmed by repeating the above steps and pressing button 2. To recall the memory positions, the vehicle must be in PARK (P). Press and release either button 1 or button 2 corresponding to the desired driving position. A single chime will sound and the memory position will be recalled. 1-4