2006 Infiniti FX35 Owner's Manual - Page 168

The Map Background is related to the navigation system. Refer to the separate Navigation System Owner's Manual. Display Off: To turn off the screen, push the "SETTING" button and select the "Display" key and "Display Off" key. The indicator of the "Display Off" will turn on. When any mode button is pushed with the screen off, the screen turns on for further operation. The screen will turn off automatically 5 seconds after the operation is finished on the map display in the Audio, HVAC (Heater and air conditioner). To turn on the screen, push the "SETTING" button and select the "Display" key and "Display Off" key, then set the screen to on " button. by pushing the ENTER " Setting Audio or HVAC display: Choose the "Audio" or "HVAC" (Heater and air conditioner) key to be displayed at the bottom, by using the INFINITI controller. The audio or HVAC (heater, air conditioner) setting condition will normally appear on the screen. To return to the setting screen, push the "SETTING" button or BACK " " button. SAA1323 SAA1390 "Display" settings The DISPLAY SETTINGS screen will appear when selecting the "Display" key and pushing the ENTER " " button. Brightness/Contrast/Map Background: To adjust the brightness and contrast of the screen, select the "Brightness/ Contrast/Map Background" key and push the ENTER " " button. Then you can adjust the brightness to Darker or Brighter, the contrast to Lower or Higher using the INFINITI controller. Vehicle electronic systems The VEHICLE ELECTRONIC SYSTEMS screen will appear when selecting the "Vehicle Electronic Systems" key with the INFINITI controller and pushing the ENTER " " button. You can set the various electronic systems operating conditions. To set an operating condition, select the applicable item using the INFINITI controller, and push the ENTER " " button. The indicator light alternately turns on and off each time the ENTER " " 4-16 Display screen, heater, air conditioner and audio systems