2006 Infiniti FX35 Owner's Manual - Page 246

using the accelerator pedal. Always stay alert and avoid using the ICC system when it is not recommended in this section. ahead. The sensor generally detects the signals returned from the reflectors on a vehicle ahead. Therefore, if the sensor cannot detect the reflector on the vehicle ahead, the ICC system may not maintain the selected distance. The following are some conditions in which the sensor cannot detect the signals: When the reflector of the vehicle ahead is positioned high on the vehicle (trailer, etc.) SSD0315A When the reflector on the vehicle ahead is missing, damaged or covered When the reflector of the vehicle ahead is covered with dirt, snow and road spray When the snow or road spray from traveling vehicles reduces the sensor's visibility When dense exhaust or other smoke (black smoke) from vehicles reduces the sensor's visibility When excessively heavy baggage is loaded in the rear seat or the trunk of your vehicle VEHICLE-TO-VEHICLE DISTANCE MODE OPERATION Always pay attention to the operation of the vehicle and be ready to manually control the proper following distance. The vehicle-to-vehicle distance control mode of the Intelligent Cruise Control (ICC) system may not be able to maintain the selected distance between vehicles (following distance) or selected vehicle speed under some circumstances. The vehicle-to-vehicle distance control mode uses a sensor A located on the front of the vehicle to detect vehicles traveling 5-28 Starting and driving