2006 Infiniti FX35 Owner's Manual - Page 91

When traveling with no heavy load or on a flat road, select position 0. WARNING Xenon headlights are extremely bright compared to conventional headlights. If the xenon headlights hit the rearview mirror of the vehicle ahead or the windshield of the oncoming vehicle, the driver of these vehicles may have difficulty driving because of the brightness. Use the headlight aiming control switch to lower the light axis. See "Xenon headlights" earlier in this section for additional information. ning lights illuminate once the parking brake is released. The daytime running lights will remain on until the ignition switch is turned off. The daytime running light may come on after turning the key to the OFF position and immediately turning it to the ON position. This is not a malfunction. The daytime running light will be turned off when the headlight switch is turned to the position. AUTO or The daytime running light will remain on until the ignition switch is turned to the ACC or OFF position. Turn the fog light switch to the position to turn the fog light ON when driving at night if necessary. SIC2140 INSTRUMENT BRIGHTNESS CONTROL The instrument brightness control operates when the light switch is in the or position. To adjust the brightness of instrument panel lights, press the control switches located on the left side of the meter panel. Pressing the upper switch A will brighten the lights. The lower switch B dims the lights. Repeatedly pressing the lower switch will turn the lights off. DAYTIME RUNNING LIGHT SYSTEM (CANADA ONLY) The daytime running lights automatically illuminate when the engine is started with the parking brake released. The daytime running lights operate with the headlight switch in the OFF position or in the position. If the parking brake is applied before the engine is started, the daytime running lights do not illuminate. The daytime run- WARNING When the daytime running light system is active, tail lights on your vehicle are not on. It is necessary at dusk to turn on your headlights. Failure to do so could cause an accident injuring yourself and others. Instruments and controls 2-27