2005 Jeep Wrangler Owner's Manual - Page 184
2005 Jeep Wrangler Manual
Page 184 highlights
184 STARTING AND OPERATING off-road driving (4L range only), which will allow cranking the engine without depressing the clutch, follow these steps: 1. Locate the Power Distribution Center (PDC) in the engine compartment. Refer to "Fuse Panel" in Section 7 of this manual. 2. Put a 10 Amp fuse in the PDC cavity (#28) marked as Clutch Override. NOTE: A fuse is provided in fuseblock cavity (f19 or f20) marked as Spare. 3. Be sure to re-engage the clutch interlock safety feature by following these steps in reverse order when you are finished off-road driving. Automatic Transmission Shifting from D (Drive) to P (Park) or R (Reverse) (or from P or R to D) should be done only after the accelerator pedal is released and the vehicle is stopped. Be sure to keep your foot on the brake when moving the shift lever between these gears. Automatic Shift Controls