2010 Jeep Wrangler Owner's Manual - Page 247

246 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge The pointer shows the level of fuel in the fuel tank. If jump starting is required, refer to "Jump Starting Procedures" in "What To Do In Emergencies". 3. Front Fog Light Indicator - If Equipped This indicator will illuminate when the front fog NOTE: When the ignition switch is turned to OFF, the lights are on. fuel gauge and temperature gauge may not show accurate readings. When the engine is not running, turn the 4. Low Fuel Warning Light ignition switch to ON to obtain accurate readings. When the fuel level reaches approximately 2.8 gal (10.6L) this light will turn on and a single chime 2. Charging System Light will sound. This light shows the status of the electrical charging system. The light should come on when the 5. Speedometer ignition switch is first turned ON, and remain on briefly Indicates vehicle speed. as a bulb check. If the light stays on or comes on while 6. Front Axle Lock Indicator - If Equipped driving, turn off some of the vehicle's non-essential Indicates when the front axle lock has been electrical devices or increase engine speed (if at idle). If activated. the charging system light remains on, it means that the vehicle is experiencing a problem with the charging system. Obtain SERVICE IMMEDIATELY. See an authorized dealer.