2012 Jeep Compass Owner Manual - Page 222

220 UNDERSTANDING YOUR INSTRUMENT PANEL Press and hold the SELECT button when in this display NOTE: A good calibration requires a level surface and until "ENGLISH" or "METRIC" appears to make your an environment free from large metallic objects such as buildings, bridges, underground cables, railroad tracks, selection. etc. Confirmation of Voice Commands - If Equipped When ON is selected, all voice commands from the Manual Compass Calibration Uconnect™ system are confirmed. Press and hold the If the compass appears erratic and the "CAL" indicator SELECT button when in this display until "ON" or does not appear in the EVIC display, you must put the compass into the Calibration Mode manually as follows: "OFF" appears to make your selection. Automatic Compass Calibration This compass is self-calibrating, which eliminates the need to set the compass manually. When the vehicle is new, the compass may appear erratic and the EVIC will display "CAL" until the compass is calibrated. You may also calibrate the compass by completing one or more 360-degree turns (in an area free from large metal or metallic objects) until the "CAL" message displayed in the EVIC turns off. The compass will now function normally. 1. Start the engine. Leave the shift lever in PARK in order to enter the EVIC Programming Menus. 2. Press the MENU button until the Personal Settings (Customer-Programmable Features) menu displays in the EVIC. 3. Press the DOWN button until "Calibrate Compass" displays in the EVIC.