2012 Jeep Compass Owner Manual - Page 308

306 STARTING AND OPERATING AUTOSTICKா AutoStick௡ is a driver-interactive transmission that offers six manual ratio changes to provide you with more control. AutoStick௡ allows you to maximize engine braking, eliminate undesirable upshifts and downshifts, and improve overall vehicle performance. This system can also provide you with more control during passing, city driving, cold slippery conditions, mountain driving, trailer towing, and many other situations. Automatic ratio changes upward will only occur to protect the Continuously Variable Automatic Transmission (CVT) and/or the engine from overspeed. Changes down will only happen at minimum engine speed to prevent stalling. Operation NOTE: AutoStick௡ is not available until the CVT warms up in cold weather. AutoStick௡ operation is activated in the DRIVE position by moving the shift lever side-to-side. Moving the shift lever to the (+) side will activate AutoStick௡ and shift up to the next higher manual ratio, unless you are already operating in or near Overdrive, in which case sixth gear ratio will be selected. In like manner, moving the shift lever to (-) will activate AutoStick௡ and shift to the next lower manual ratio. After AutoStick௡ is activated, the manual ratio selected is displayed in the transmission ratio display and tipping the shift lever to the (+) or (-) direction will cause an upshift or downshift by one ratio. AutoStick௡ Is Deactivated: • By holding the shift lever to (+) momentarily • When the shift lever is shifted out of DRIVE • When in sixth position, by touching the shift lever to the right • When heavy Anti-Lock Brake System (ABS) application is detected