2012 Jeep Liberty Owner Manual - Page 155

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 3. Press and release the SET button on the memory switch, then press the side of the rocker switch labeled (2) within five seconds. The EVIC, if equipped, will display which memory position is being set. NOTE: • For vehicles equipped with an automatic transmission, memory profiles can be set without the vehicle in To program your RKE transmitters, perform the followPARK, but the vehicle must be in PARK to recall a ing: memory profile. 1. Remove the key from the ignition. • For vehicles equipped with a manual transmission, the 2. Select the desired memory profile 1 or 2. vehicle speed must be at 0 mph (0 km/h) to recall a memory profile. 3. Press and release the SET button on the memory switch, then within five seconds press and release the • The Recall Memory with Remote Key Unlock feature side of the rocker switch labeled 1 or 2 accordingly. can be turned on and off through the EVIC, if ЉMemory Profile Set" (1 or 2) will display in the EVIC, if equipped. Refer to "Electronic Vehicle Information equipped. Center (EVIC)/Customer-Programmable Features" in "Understanding Your Instrument Panel" for further 4. Press and release the LOCK button on the RKE information. transmitter within 10 seconds. Linking And Unlinking The Remote Keyless Entry Transmitter To Memory Your Remote Keyless Entry (RKE) transmitters can be programmed to recall one of two pre-programmed memory profiles with a press of the UNLOCK button on the RKE transmitter. 3