2012 Jeep Liberty Owner Manual - Page 239
2012 Jeep Liberty Manual
Page 239 highlights
UNDERSTANDING YOUR INSTRUMENT PANEL 237 the driver's seat belt is unbuckled, a chime will sound. After the bulb check or when driving, if the driver seat belt remains unbuckled, the Seat Belt Warning Light will flash or remain on continuously. Refer to "Occupant Restraints" in "Things To Know Before Starting Your Vehicle" for further information. 31. Brake Warning Light This light monitors various brake functions, including brake fluid level and parking brake application. If the brake light turns on it may indicate that the parking brake is applied, that the brake fluid level is low, or that there is a problem with the anti-lock brake system reservoir. System (ABS) / Electronic Stability Control (ESC) system. In this case, the light will remain on until the condition has been corrected. If the problem is related to the brake booster, the ABS pump will run when applying the brake and a brake pedal pulsation may be felt during each stop. The dual brake system provides a reserve braking capacity in the event of a failure to a portion of the hydraulic system. A leak in either half of the dual brake system is indicated by the Brake Warning Light, which will turn on when the brake fluid level in the master cylinder has dropped below a specified level. The light will remain on until the cause is corrected. 4 NOTE: The light may flash momentarily during sharp If the light remains on when the parking brake has been cornering maneuvers, which change fluid level condidisengaged, and the fluid level is at the full mark on the tions. The vehicle should have service performed, and master cylinder reservoir, it indicates a possible brake the brake fluid level checked. hydraulic system malfunction or that a problem with the Brake Booster has been detected by the Anti-Lock Brake