2013 Jeep Grand Cherokee Owner Manual SRT - Page 192

190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Before programming your RKE transmitters you 3. Once the profile has been recalled, press and release must select the "Remote Linked to Memory" feature the SET (S) button on the memory switch, then press and release button (1) or (2) accordingly. "Memory through the Electronic Vehicle Information Center Profile Set" (1 or 2) will display in the instrument (EVIC), refer to "Electronic Vehicle Information Center cluster on vehicles equipped with the EVIC. (EVIC)/Customer-Programmable Features" in "Understanding Your Instrument Panel" for further information. 4. Press and release the LOCK button on the RKE To program your RKE transmitters, perform the followtransmitter within 10 seconds. ing: NOTE: Your RKE transmitters can be unlinked to your 1. Remove the Key Fob from the ignition (or change the memory settings by following steps 1-4 above and pressignition to OFF, for vehicles equipped with Keyless ing the UNLOCK button (instead of LOCK) on the RKE Enter-N-Go). transmitter in Step 4. 2. Select desired memory profile (1) or (2). Memory Position Recall NOTE: If a memory profile has not already been set, NOTE: The vehicle must be in PARK to recall memory refer to ЉProgramming The Memory FeatureЉ for instruc- positions. If a recall is attempted when the vehicle is not tions on how to set a memory profile. in PARK, a message will be displayed in the Electronic Vehicle Information Center (EVIC).