2014 Jeep Grand Cherokee Owner Manual - Page 444

442 STARTING AND OPERATING through the radio. Refer to "Uconnect® Access Settings" flashing on the "Up" button, the highest flashing indicain "Understanding Your Instrument Panel" for further tor lamp is the position the system is working to achieve. When lowering, if multiple indicators are flashing on the information. ЉUpЉ button the lowest solid indicator lamp is the posiElectronic Vehicle Information Center (EVIC) tion the system is working to achieve. Display Messages Pressing the "UP" button once will move the suspension When the appropriate conditions exist, a message will one position higher from the current position, assuming all appear in the EVIC display. Refer to "Electronic Vehicle conditions are met (i.e. engine running, speed below threshInformation Center (EVIC)" in "Understanding Your old, etc). The "UP" button can be pressed multiple times, Instrument Panel" for further information. each press will raise the requested level by one position up An audible chime will be heard whenever a system error to a maximum position of OR2 or the highest position allowed based on current conditions (i.e. vehicle speed, etc). has been detected. Pressing the "DOWN" button once will move the suspension one position lower from the current level, asThe indicator lamps 3 through 6 will illuminate to show suming all conditions are met (i.e. engine running, doors the current position of the vehicle. Flashing indicator closed, speed below threshold, etc). The "DOWN" button lamps will show a position which the system is working can be pressed multiple times. Each press will lower the to achieve. When raising, if multiple indicator lamps are Operation