2014 Jeep Grand Cherokee Owner Manual SRT - Page 171

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 • The Easy Entry/Easy Exit feature is disabled when the driver seat position is less than 0.9 in (22.7 mm) This feature provides automatic driver seat positioning to forward of the rear stop. At this position, there is no enhance driver mobility when entering and exiting the benefit to the driver by moving the seat for Easy Exit vehicle. or Easy Entry. The distance the driver seat moves depends on where Each stored memory setting will have an associated Easy you have the driver seat positioned when you remove the Entry and Easy Exit position. Key Fob from the ignition (or change the ignition to OFF, for vehicles equipped with Keyless Enter-N-Go™). NOTE: The Easy Entry/Exit feature is not enabled when the vehicle is delivered from the factory. The Easy • When you remove the Key Fob from the ignition (or Entry/Exit feature is enabled (or later disabled) through change the ignition to OFF, for vehicles equipped with the Uconnect® system screen. Refer to "CustomerKeyless Enter-N-Go™), the driver seat will move Programmable Features - Uconnect® Access 8.4A/ about 2.4 in (60 mm) rearward if the driver seat 8.4AN Settings " in "Understanding Your Instrument position is greater than or equal to 2.7 in (67.7 mm) Panel" for further information. forward of the rear stop. The seat will return to its previously set position when you place the ignition into the ACC or RUN position. Easy Entry/Exit Seat 3