2014 Jeep Grand Cherokee Owner Manual SRT - Page 32

30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Enter Remote Start Mode • For security, power window and power sunroof operation (if equipped) are disabled when the vehicle is Press and release the REMOTE START button in the Remote Start mode. on the RKE transmitter twice within five seconds. The parking lights will flash, vehicle • The engine can be started two consecutive times (two doors will lock, and the horn will chirp twice 15-minute cycles) with the RKE transmitter. However, (if programmed). Once the vehicle has started, the engine the ignition switch must be cycled to the ON/RUN will run for 15 minutes. position before you can repeat the start sequence for a third cycle. NOTE: To Exit Remote Start Mode Without Driving The • If your power door locks were unlocked, Remote Start Vehicle will automatically lock the doors. Press and release the REMOTE START button one time or • If an engine fault is present or fuel level is low, the allow the engine to run for the entire 15-minute cycle. vehicle will start and then shut down in 10 seconds. NOTE: To avoid unintentional shut downs, the system • The park lamps will turn on and remain on during will disable the one time press of the REMOTE START Remote Start mode. button for two seconds after receiving a valid Remote Start request.