2011 Kawasaki Z1000 Owners Manual - Page 122
2011 Kawasaki Z1000 Manual
Page 122 highlights
120 MAINTENANCE AND ADJUSTMENT Chain Slack Adjustment Loosen the chain adjuster clamp bolts on the left and right sides. • the chain adjuster with the allen • Turn wrench until the drive chain has the correct amount of slack. the wheel, measure the chain • Rotate slack again at the tightest position, and readjust if necessary. WARNING A loose clamp bolts can lead to an accident resulting in serious injury or death. Tighten the clamp bolts to the proper torque. the wheel alignment. • Check Check rear brake (see Brakes • section the in this chapter). Tightening Torque Chain Adjuster Clamp Bolts: 64 N·m (6.5 kgf·m, 47 ft·lb) A. Clamp Bolt B. Chain Adjuster C. Allen Wrench NOTE clamp the chain adjuster • Tighten bolts to the specified torque. żIf a torque wrench is not available, this item should be serviced by a Kawasaki dealer.