2004 Lexus IS 300 Owners Manual - Page 196

03 07.09 OCCUPANT RESTRAINT SYSTEMS Setting the driving position Recalling the memorized position SV16170 SV16171 1. Adjust the driver's seat to the desired position. 2. While pushing the "SET" button, push button "1" or "2" until the signal beeps. The beep sound means that the positions are recorded in the computer's memory. By repeating these two steps and pressing the remaining button, the driving position for another driver can be recorded. To set a new memorized position, select the desired position and perform step 2. The previous memory will be erased and the new position will be set. To make only slight changes to an already memorized position, the easiest way is to first activate the memorized position, then make the desired changes and perform step 2 above. Automatic transmission- When you push button "1" or "2", the driving position will be automatically adjusted to the position recorded for that button. Manual transmission- While button "1" or "2" is being pushed down, the driving position will be automatically adjusted to the position recorded for that button. Conditions for memorized position activation D Automatic transmission: Ignition key "ON" and selector lever in "P" position. D Manual transmission: Ignition key "ON" and apply the parking brake. D Ignition switch off and within 30 seconds of opening driver's door. 177