2004 Lexus IS 300 Owners Manual - Page 415

03 07.09 BODY Waxing your Lexus Polishing and waxing is recommended to maintain the original beauty of your Lexus' finish. Apply wax once a month or if the vehicle surface does not repel water well. 1. Always wash and dry the vehicle surface before you begin waxing, even if you are using a combined cleaner and wax. 2. Use a good quality polish and wax. If the finish has become extremely weathered, use a car-cleaning polish, followed by a separate wax. Carefully follow the manufacturer's instructions and precautions. Be sure to polish and wax the chrome trim as well as the paint. 3. Wax the vehicle again when water does not bead but remains on the surface in large patches. Windshield washer nozzles: Make sure that the nozzles do not become blocked when waxing. If a nozzle becomes blocked, contact your Lexus dealer to have the vehicle serviced. CLEANING THE INTERIOR CAUTION D Be careful not to splash water or spill liquid on the floor. This may prevent the side airbags from activating correctly, resulting in serious injury. D Do not wash the vehicle floor with water, or allow water to get onto the floor when cleaning the vehicle interior or exterior. Water may get into audio components or other electrical components above or under the floor carpet (or mat) and cause a malfunction; and it may cause body corrosion. Leather Interior The selected leather is used in your Lexus. Due to characteristics of leather products, some parts of leather may be rough, uneven or scratched originally. To keep good appearance, we recommend you to clean it periodically twice a year. Remove dirt on the leather in the following ways: 1. Wipe it off lightly using a soft cloth (e.g. gauze) dampened with 5% solution of neutral detergent for wool. 2. Wring water from a clean cloth and thoroughly wipe off all traces of detergent with it. 3. Wipe off the surface of the leather with a dry soft cloth. Allow the leather to dry in a ventilated shaded area. Excess of wet may cause the hardening or shrinking of the leather. 397 NOTICE If a nozzle becomes blocked, do not try to clear it with a pin or other object. The nozzle will be damaged.