2004 Lexus IS 300 Owners Manual - Page 314
2004 Lexus IS 300 Manual
Page 314 highlights
03 07.09 IN CASE OF AN EMERGENCY SS41012 SS41013 Before putting on the wheel, remove any corrosion on the mounting surfaces with a wire brush or such. Installation of wheels without good metal- to- metal contact at the mounting surface can cause wheel nuts to loosen and eventually cause a wheel to come off while driving. 8. Reinstall all the wheel nuts finger tight. Align the holes in the wheel with the bolts. Then lift up the wheel and get at least the top bolt started through its hole. Wiggle the tire and press it back over the other bolts. Reinstall the wheel nuts and tighten them as much as you can by hand. Press the tire back and see if you can tighten them more. CAUTION Never use oil or grease on the bolts or nuts. Doing so may lead to overtightening the nuts and damaging the bolts. The nuts may loosen and the wheels may fall off, which could cause a serious accident. If there is oil or grease on any bolt or nut, clean it. 295