2012 Lexus LFA Owners Manual - Page 483
2012 Lexus LFA Manual
Page 483 highlights
Using the meter Checking and topping up the oil level The LFA uses a dry-sump oil system to circulate the engine oil between the engine and the oil tank. Therefore, depending on the conditions, the level of oil in the oil tank can vary greatly. Cautions when checking the oil level • In order to attain the most accurate measurement, leave the engine running after driving and check the oil level while the engine is idling. The oil level will take time to stabilize if the engine is stopped and started again. • As the engine oil level in the oil tank varies depending on the driving condition of the vehicle immediately before measurement, the results may vary even if the overall oil amount is constant. MAX MIN Cautions when topping up the oil level • Ensure that the oil level does not fall below the MIN marking. • The space between the MAX and MIN markings represents approximately 2.1 qt. (2.0 L, 1.8 Imp. qt.). While the oil may be topped up as required, never add more than 0.5 qt. (0.5 L, 0.4 lmp. qt.) at one time. • Even if the oil level is below the MAX mark, do not add more oil than necessary. Oil level gauge • The oil level gauge installed on the oil tank is for oil changes. Do not use it to check the current oil level. 69