2012 Lexus LFA Owners Manual - Page 515
2012 Lexus LFA Manual
Page 515 highlights
When transporting the vehicle 2 Release the belt and take out the tool bag. Take the towing eyelet and flathead screwdriver. 3 Remove the eyelet cover using a lathead screwdriver. To protect the bodywork, place a rag between the screwdriver and the vehicle body, as shown in the illustration. 4 Insert the towing eyelet into the hole and tighten partially by hand. 5 Completely lower the transport vehicle's latbed and attach its cable to the towing eyelet. 6 Slowly wind up the transport vehicle's cable, being careful to avoid contact between the LFA and the latbed. Use additional ramps if necessary. 101
101
When transporting the vehicle
2
Release the belt and take out the tool
bag.
Take the towing eyelet and flathead
screwdriver.
3
Remove the eyelet cover using a
²athead screwdriver.
To protect the bodywork, place a rag between
the screwdriver and the vehicle body, as shown
in the illustration.
4
Insert the towing eyelet into the hole
and tighten partially by hand.
5
Completely lower the transport vehicle’s ²atbed and attach its cable to the towing
eyelet.
6
Slowly wind up the transport vehicle’s
cable, being careful to avoid contact
between the LFA and the ²atbed.
Use additional ramps if necessary.