2013 Lexus ES 350 Owners Manual - Page 749

776 7-2. Steps to take in an emergency Warning message Details Correction procedure Drive for a short while and check if the display updates. If the radio wave conditions improve, the display may return to normal. If the tire pressure is still not displayed after driving for several minutes, stop Indicates that the tire the vehicle in a safe position information canplace, turn the "START not be recognized STOP ENGINE" switch off then on again, and start driving. If the tire pressure is still not displayed even after repeating this several times, have the vehicle inspected at your Lexus dealer. Indicates that the pre-collision system is not cur- • Check the grille cover rently functional because and the sensor and the grille cover or the clean them if they are sensor is dirty dirty. This message also • In case of overheating, appears when the prethe system will become functional once the syscollision system is not functional due to overtem cools down. heating. (Flashes) (If equipped) *: Refer to the separate "Scheduled Maintenance" or "Owner's Manual Supplement" for the maintenance interval applicable to your vehicle. ES350 300h_OM_OM33A01U_(U)