2000 Lincoln LS Owner Guide 1st Printing - Page 238

Maintenance and care 3. Install the protective cover and secure with four tabs. 4. Turn the headlamps on and make sure they work properly. If the headlamp was correctly aligned before you changed the bulb, you should not need to align it again. Replacing foglamp bulbs The halogen bulb contains gas under pressure. The bulb may shatter if the glass envelope is scratched or if the bulb is dropped. Handle the bulb carefully. Grasp the bulb only by its base. Avoid touching the glass envelope. 1. Disconnect the electrical connector from the foglamp bulb. 2. Rotate the foglamp bulb counterclockwise and remove from the foglamp (the rear side of the foglamp is shown). 3. Install the foglamp bulb in foglamp by rotating clockwise. 4. Connect the electrical connector to the new foglamp bulb. Replacing front parking lamp/turn signal lamp bulbs For bulb replacement, see a dealer or qualified technician. Replacing high-mount brakelamp bulbs For bulb replacement, see a dealer or qualified technician. Replacing tail lamp/backup bulbs For bulb replacement, see a dealer or qualified technician. Replacing license plate lamp bulbs For bulb replacement, see a dealer or qualified technician. Interior bulbs Check the operation of the following interior bulbs frequently: • Front map lamps • Rear dome/reading lamp For bulb replacement, see a dealer or qualified technician. 238