2002 Lincoln Blackwood Owner's Manual - Page 204

Maintenance and care Replacing tail/turn/backup lamp bulbs 1. Open the tailgate dual doors to expose the lamp assembly nuts. 2. Remove the nuts from the lamp assembly. 3. Carefully pry the lamp assembly away from the vehicle to expose the bulb socket. 4. Rotate the bulb socket counterclockwise and remove from lamp assembly. 5. Pull bulb straight out of socket and push in the new bulb. 6. Install the bulb socket into the lamp assembly and rotate clockwise. 7. Carefully install the lamp assembly on the pickup box aligning the three tabs into the slots. 8. Secure the lamp assembly on the vehicle with the nut. Replacing rear cornering/backup lamp bulb 1. Reach behind the rear bumper and remove two nuts from the lamp assembly. 2. Carefully pull the lamp assembly outward to expose the electrical connector. 3. Rotate the bulb socket counterclockwise and remove. 4. Pull the bulb straight out of the socket and push in the new bulb. 5. To complete installation, follow the removal procedure in reverse order. 204