2003 Lincoln Aviator Owner's Manual - Page 141
2003 Lincoln Aviator Manual
Page 141 highlights
Driver Controls For optimum calibration, turn off all electrical accessories (heater/air conditioning, wipers, etc.) and make sure all vehicle doors are shut. 1. Turn ignition to the ON position. 2. Start the engine. 3. Determine your magnetic zone by referring to the zone map. 3 2 1 4. From Info menu, select the Compass/Odometer function. (Do 4 not select Trip, DTE, or AFE. The top of the message center must be 5 blank). 15 14 13 12 6 7 8 9 1011 5. Press and hold the RESET and SETUP control until the message center display changes to show the current zone setting. 6. Release the RESET AND SETUP control, then slowly press RESET down again. 7. Press the SETUP control repeatedly until the correct zone setting for your geographic location is displayed on the message center. To exit the zone setting mode press and release the RESET control. 8. Press the RESET control to start the compass calibration function. 9. Slowly drive the vehicle in a circle (less than 5 km/h [3 mph]) until the CIRCLE SLOWLY TO CALIBRATE indicator changes to CALIBRATION COMPLETED. This will take up to three circles to complete calibration. 10. The compass is now calibrated. 141 2003 Aviator f/k/a Navigator LS (231) Owners Guide (post-2002-fmt) USA English (fus)