2014 Lincoln Navigator Owner Manual Printing 1 - Page 132

Seats 131 MEMORY FUNCTION This feature will save and recall the positions of the driver seat, power mirrors, adjustable pedals, and steering column. The memory seat control is located on left side of the driver's seat. 1 2 Programming Memory Positions 1. Turn the ignition on. 2. To program position 1, move the memory features to their desired position using the associated controls. 3. Press and hold button 1 for about two seconds. A chime will sound confirming that a memory position has been set. To program position 2, repeat the previous procedure using button 2. You can program a memory position at any time. To program the memory feature to a remote control transmitter, see the Keys and Remote Control chapter. Recalling Saved Memory Positions To recall position 1 settings, press and release memory button 1. The memory features will move to the saved memory 1 position. You can also recall the memory positions when you: • press your remote control transmitter unlock button (if the remote control is programmed to a memory position) or, • enter a valid Securicode personal entry code that is programmed to a memory position. If the easy entry and exit feature is on, the mirrors and pedals will move to the programmed memory position and the seat will move to the easy entry position. The seat will move to the driving memory position when the ignition is activated. 2014 Navigator (nav) Owners Guide gf, 1st Printing, June 2013 USA (fus)